Skip to content
Quiz Collection 2 - Advanced IS OUT NOW!
Quiz Collection 2 - Advanced IS OUT NOW!

Country

Punchy & Tight Drums Technique

Punchy & Tight Drums Technique

There are plenty different ways to make drums punchy, all the way from equalization, compression and other ways to dynamically treat drums. However, there's a technique that allows us to make them punchy, tight and louder at the same time without taking the headroom.

In this blog, I'll be showing you how to use a combination of three plugins in order to make your drums feel much louder, punchier and tighter at the same time.

The plugins we're going to use for this purpose:
1. SSL Bus Compressor 2
2. Sonic Anomaly Transpire
3. FabFilter Pro L2

Click here to enroll to our EQ Masterclass

Step 1: Compression

Using SSL Bus Compressor 2, my goal is to tighten the dynamics and achieve consistency without overdoing any processing. You can use any VCA compressor for this purpose.

Recommended settings (starting points):
1. Slow attack (10-30ms)
2. Fast release (80-200ms)
3. 2:1 Ratio
4. High-pass filter at 90-100Hz
5. Up to 4dB of gain reduction
6. Make up gain to compensate for loudness differences

Step 2: Transient designer

This step is very straight forward and simple. The goal here is to only increase the initial attack of your drums. So, you can do it with ease by increasing the very first knob in Transpire. My advice is to avoid overdoing it since this plugin is very powerful. As you can see, a very small amount did a great job.

Now look at the headroom you have left. This plugin raised the peak level, right? We're fixing that in the next step.

Step 3: Limiting

Now, this is where we make art. I'm actually going to use something between clipping and limiting with Pro L2. First, make the attack slow as possible (all the way to the right). Next, make the release as fast as possible (all the way to the left). We're making the attack slow as possible so it can let those transients punch through without chopping them off completely.

FabFilter Pro L2 also offers channel linking feature which can be great for mastering purpose, but for drums, I like to keep it off. By keeping it off, I'm telling Pro L2 to individually limit my left and right channel which is the exact effect I'm looking for. This can cause distortion if you're not careful, so have that in mind.

In terms of style, I went for "Punchy" since that's what we're looking for, right?

Now, activate Unity Gain on (1:1 button that can be located at the bottom right corner where the output gain feature is). Unity gain will tell the limiter to compensate for loudness differences, so you won't be able to trick your ears by "louder is better". This will also help you to actually hear the limiting and what's it doing to your drums.

Final step is to increase gain and notice the differences. As you increase, you'll get to the point where your drums become more consistent, tight and punchy at the same time.

Now, look at your peak level. You have a plenty of headroom left, but your drums are more powerful, punchy, tight and consistent at the same time.

Master The Art Of EQUALIZATION with Md3sign Studio:

With EQ MASTERCLASS you will:

  • Learn all the necessary fundamentals of music equalization
  • Understand why is equalization important
  • Learn how to use equalization as your biggest weapon for powerful mixes
  • Attend Beginner to Pro lessons (5+ hours of video content)
  • Test your knowledge after each lesson through quizzes
  • Learn advanced EQ tricks used by pros
  • Receive unique EQ presets made during the classes
  • Receive 160+ pages EQ Book
Learning is based on demand, so with a single purchase, you'll access all the pre-recorded and professionally edited videos so you can learn as you go, whenever you have free time for learning.
Previous article 7 Tips For LOUDER Masters! 🔥
Next article 6 Pro Vocal Mixing Tips